Two-bow bimini
A compact solution for RIBs, small open boats and other small craft. Folded, it takes up little space; open, it shades the helm or the stern bench.
Azimut S7
Design and order your custom bimini.
A bimini top is a fabric roof over the cockpit that protects you from sun and rain and simply folds away when you don't need it. We build the entire bimini in our own workshop near Zagreb — both the stainless steel frame and the canvas. That is why it follows the lines of your boat, instead of your boat having to adapt to an off-the-shelf top.
We make bimini tops for every kind of boat — sailboats, motor boats, catamarans, RIBs and small open boats — from compact two-bow biminis to six-bow frames and flybridge biminis. If you already have a sound stainless steel frame, we can make just a new canvas. We measure and install on your boat in Croatia and Slovenia, and ship finished biminis to other European countries.
5.0 — average rating on our Google profile
See our work ↓The number of bows, the length and the extras depend on your boat and how you use it. These are the versions we make most often.
A compact solution for RIBs, small open boats and other small craft. Folded, it takes up little space; open, it shades the helm or the stern bench.
For the larger cockpits of sailboats and motor boats. More bows mean a more stable frame over longer spans, and for larger frames we recommend 30 mm stainless steel tubes.
An extra panel extends the shade towards the stern or the bow — behind the backstay, over the skipper's helm or as a forward extension.
For motor yachts with a flybridge we build larger bimini frames with five or more bows — like the bimini on the Ferretti flybridge in our archive.
For RIBs we make bimini tops with a made-to-measure stainless steel frame — among others for ZAR Formenti 61, SACS S640, Capelli Tempest 750 and Neptune ribs 580.
Alongside the bimini we also make the sprayhood, the stern enclosure and the cockpit enclosure, so every part can be made from the same fabric in the same colour.
Bimini tops in shops are mostly ready-made kits in standard sizes. We make every bimini to measure, and we build both the frame and the canvas ourselves.
Ready-made bimini tops from shops usually have a folding frame of anodised aluminium, with tubes of about 22 mm and standard widths. Such a bimini is cheaper, but it can only fit your boat so well.
We bend our bows from polished marine-grade AISI 316L stainless steel, 25 or 30 mm in diameter, to the measurements of your boat. Stainless steel is stronger than aluminium and resists corrosion at sea, so the bimini stands more firmly in the wind and keeps its shape for years.
The canvas is Sunbrella Plus — an acrylic fabric resistant to UV, salt and mildew, with a 5-year manufacturer warranty and more than 40 colours. Zippers are YKK, and we give a written warranty on workmanship and materials.
See the materials →If the frame is sound but the canvas is faded or damaged, you don't need a whole new bimini — we make just a new canvas, tailored to your bows.
If the frame doesn't meet these requirements, we make a complete custom bimini — a new stainless steel frame and canvas.
The price depends on the dimensions, the number of bows, the diameter of the stainless steel tubes, the chosen canvas and extras such as an extension or a forward extension. The quickest way to get a quote is to put your bimini together in our 3D configurator and send an inquiry — the configuration reaches us with all the measurements, and we get back to you with a quote.
Both. We bend the stainless steel bows on a CNC machine in our own workshop, and the canvas is CNC-cut and sewn in-house. So the frame and the canvas are made as one unit from the start, based on the 3D measurement of your boat.
Yes, if the frame is stainless steel and in good condition — the bows must not be dented or bent. Before we come, send us photos of the frame; we then take the measurements on site and make the canvas to fit the existing frame. We do not take on aluminium frames.
An aluminium bimini from a shop is cheaper and comes in standard sizes. A custom stainless steel frame is stronger, resists corrosion at sea and follows the lines of the boat — the better choice if you use your bimini all season and want it to look right for years.
From order confirmation to installation it usually takes 2 to 4 weeks. The exact time depends on the stock of the chosen fabric and colour and on the location of the boat. In spring, before the season, lead times are longer, so it pays to get in touch early for the summer.
Yes. We make bimini tops for every kind of boat — RIBs, small open boats, speedboats, motor boats, sailboats and catamarans. For RIBs we have made them for ZAR Formenti, SACS, Capelli and Neptune ribs, among others.
Yes. A bimini ordered through the configurator comes with instructions and all the necessary parts, and standard tools are enough for installation. If you prefer, we will measure and install it on your boat.
The canvas is Sunbrella Plus acrylic with a 5-year manufacturer warranty, the bows are polished AISI 316L stainless steel, other stainless parts are AISI 316, and the zippers are YKK. We give a written warranty on workmanship and materials.
Yes — to the marina, the dry storage or the anchorage, along the entire Adriatic coast and in Slovenia. We also ship finished bimini tops to other European countries.
Didn't find the answer? Send an inquiry or put your bimini together in the 3D configurator.
Bimini tops we have made for more than 80 boat models — each one made to measure. Filter by brand and open a model to see the full gallery.
Versions with extensions and forward extensions, and bimini frames with five and six stainless steel bows.
bimini with extension behind the backstay
bimini with 4 inox arches
bimini with 4 inox arches
bimini with extension for skipper
bimini with 4 inox arches
bimini for skipper with bow extension
bimini for skipper with bow extension
bimini with 6 inox arches
bimini on flybridge with 5 inox arches
bimini for skipper with bow extension
